To make the fiber laser cutting machine regular operation needs some supporting equipment.
The user or service team must check the equipment list and purchase the related equipment to install and use the fiber laser metal cutter successfully.
Voltage Stabilizer
Voltage instability will damage the laser source and other accessories. In contrast, the laser source is the fiber laser cutting machine’s most critical and expensive part. The voltage regulator is the necessary supporting equipment for stable voltage input.
It is recommended that a higher KVA voltage regulator be purchased to supply the entire primary circuit if the end-user economy permits. If conditions do not allow, then at least to the laser source with a voltage regulator.
The voltage stabilizer is a critical accessory unit for the fiber laser metal cutting machine. Three-phase automatic high-efficiency voltage stabilizer is a fit one.
Different laser power needs related voltage regulator power. For example, the 2kw laser source and below can use 40KVA, 3kw-6kw can use 80KVA, and so on. And please ask an expert to help with a suitable voltage stabilizer when you need advice.
3phase, 220V, 50HZ, or customized to the local power supply type.
Water Chiller Units
Sanhe Tongfei is a famous water chiller brand in China’s fiber laser industry.
The “Dual-temperature” water cooler provides a stable, real-time water temperature control for the laser source while providing a water temperature close to the ambient temperature for lens cooling.
The solution solves the problem that the lens is dewy when cooled by low-temperature water and is the best choice for the whole laser equipment cooling.
TFLW Fiber Laser Cutter Water Chiller, Scope of application
Suitable for all kinds of laser cladding, welding, cutting, and other fiber laser machines.
Function and characteristics
- High-quality stainless steel cold water circulation pump, flow, high head, low noise, long life; plastic water tank, stainless steel pipes, valves without rust Worry.
- The control system adopts a liquid crystal controller, real-time display cooling water temperature, CPU automatic control, can realize man-machine dialogue, and simple and intuitive operation.
- Water temperature control accuracy ± 1 ° C, with automatic fault diagnosis function, the fault point directly displayed on the screen prompts the user to deal with it quickly.
- The RS485 communication interface is provided to realize the communication function with the host.
- Provide multiple protection functions, and passive alarm terminal, and a remote control terminal, making it easy to achieve the centralized control and monitoring of CNC.
Dust-exhausting Fan or Fume Filter
To protect the environment, manufacturers must ensure that the factory’s working environment is good and that production won’t pollute the environment.
This requires the factory to treat the smoke and dust produced during production to meet eco-friendly requirements.
Exhaust fan. An exhaust fan is an option for exhausting the smoke and dust from the cutting worktable. The most basic requirement is ensuring the production environment is clean and hygienic.
Fume filter. With higher environmental requirements, we must have a fume filter to filter smoke and dust, then let pollution-free gas into the atmosphere.
This product meets European environmental standards and is our recommended device.
Air Compressor Units
Auxiliary gas is required when the fiber laser cutting machine cuts metal sheets or pipes. Given the high cost of nitrogen and oxygen, compressed clean air is a substitute gradually.
As Compressed air cuts are introduced and tested, it has been found that cuts with compressed air are high efficient than cuts with nitrogen or oxygen alone. This effect is reflected in the cutting speed, thickness, and smoothness (carbon steel cutting).
Hannimick laser cutting matching screw air compressor to provide pure compressed gas one part to the cutting head, part as a power supply to the cylinder clamping table, part of the system is used to clean the optical system, efficient maintenance of the regular operation of laser cutting machine.
Afraid of water, fear oil? The fiber laser metal cutting machine for the gas demand is very high. We use a new design to ensure that each device fully meets the requirements of the laser cutting machine for your laser machine escort, improves cutting efficiency, and eliminates burrs!
We recommend you use the permanent magnet frequency conversion compressor to save energy and make the laser machine work more smoothly under constant pressure! Protect your expensive laser head.
Machine selection must be based on the metal cutting machine model and machine table size chosen by the supplier to recommend.
Air-conditioned room
High or low-temperature production environments, such as -20 ° C or 40° C, will make the laser source work ineffective. The water cooler can not achieve the effect of cooling the laser source.
In this case, it is necessary to provide an air-conditioned room for the laser source and water chiller, which needs to be prepared by the user according to their unique factory layout.
Feeding Machine
Gantry Crane and suction cups
Mainly for all kinds of laser-cutting machines to achieve semi-automatic feeding
The equipment has the advantages of improving the factory production efficiency, reducing the production labor cost, effectively reducing the hidden danger to the operator safety, and the device operation is simple.
Product characteristics
- A flexible and straightforward vacuum sucker feeding device uses lifting tools such as driving to absorb large and medium-thick steel sheets, aluminum, copper, stainless steel, and other metal materials.
- According to the sheet metal size, to adjust the fuselage, flexible use. It is widely used in laser cutting, such as loading and unloading, freight transportation, and logistics.
- Sheet metal 3000x1500mm, 4000x1500mm, and 6000x1500mm can be used. The maximum rated load is 800-1000kg.
Option: Custom Automatic Feeding Machine
Warning Tips
Remember to ask the supplier for the layout drawing of the fiber laser cutting machine when purchasing the necessary equipment.
A reasonable layout of the fiber laser cutting machine production lines will make your cutting production more efficient.
If you have new ideas, please let us know.